User Guide

11
DS1 User Manual
1. HARDWARE / PSU interface
5. V mount battery plate
Each PSU is equipped with a single V-Lock
battery plate. The input is 12 to 36 VDC*
There is no power button to be found on
the DS1. When wanting to interrupt power,
remove battery/batteries from the PSU or
disconnect the AC/DC power connector.
*If needing more than one battery mount an extra battery
plate can be purchased and installed separately. In the
case of using two batteries, the power draw will jump
seamlessly from one battery to another when the first
battery is depleted. Extra battery plates in both V-lock
and Gold Mount systems can be purchased in the Digital
Sputnik web store and installation of the extra battery
plate can be done by the user.
On releases prior to 2018 the DS1 PSU has two V mount
battery plates by default.
ELECTRIC SHOCK HAZARD
Use only approved power
cables. Connect only to an
outlet with protective earth.