User Guide

10
DS1 User Manual
1. HARDWARE / PSU interface
PSU interface
Jog-wheel
Rotating jog-wheel with push functionality.
Center of jog-wheel acts as OK button.
Screen
Gateway to your DS1 system. All color pa-
rameters, settings and system information is
presented on here.
For easier control, the orientation of the
display screen will rotate 180°depending on
the position of the PSU.
1. 2.4 Ghz WiFi module antenna
Removable WiFi antenna. DS1 has a WiFi
module built inside for wireless Art-Net
communication.
2. AC/DC Power input
The DS1 is powered by an external AC/DC
power converter. It convertsAC power at
110 - 240 V ~, 50/60Hz (nom.) to DC.
3. Male 5pin XLR input connector
For DMX512 function. Use XLR-Y cable if
wanting to daisy chain.
4. Light Module Socket
Back of the PSU features a light module
socket for communication and power
feeding purposes. Light Module Cable
ends and sockets can only be coupled in
certain position. There are red dots on the
connector and the port to act as a guide.
They must be aligned accordingly.
In this process it is important to NOT
TWIST THE HEAD OF THE CABLE. The
cable head should be pushed straight in
when aligned and pulled straight out.
• DO NOT TWIST THE HEAD
OF THE CABLE
• DO NOT HANG THE MODULE
OR PSU BY THE CABLE
• DO NOT STRAIN THE CABLE
Screen
Jog-Wheel
1
2
3
4
5