User Manual

18
When two or more light modules are fas-
tened together, the rst step is to lock the
light modules with respect to each other
before installing a tripod mount.
Place two lamps side by side and make
sure that cable connection sockets are
aligned pointing the same way.
Insert the lock into the center of the
touching sides of the light modules.
When only two light modules are to be
used to from a xture (locked together),
install the tripod mount by sliding it
inside the groove on the touching sides
of the lighthead (the touching point in
the corner of both lightheads) and the
groove in the tripod mount.
The washer of the lock should stay ush
with the light xture and tripod mount to
ensure correct t.
t
Use the diffuser box corner proles to
join the diffuser sides together. Attach
the diffuser sides to the lens frame,
and then slide the corner prole in from
above. The corner prole has to slide
into the connecting grooves of the sides
to tie them together.
3 | Installation instructions
Tripod mount should not be used to mount bigger fixtures
than 3 modules. Use other accessories sold separately for
this purpose.
!