User Manual

7
1. Please read through these instructions carefully before operating the DS
LED Lighting System, and keep these instructions for future reference.
2. There are numerous safety instructions and warnings that must be adhered
to for your own safety.
3. DS LED Lighting System is not intended for residential use. It is intended
for use in a professional studio or lm set.
4. The System must be serviced by a qualied technician only.
5. The System is not for use in hazardous locations.
6. Maximum ambient temperature for use is 55°C.
6.1 Do not cover cooling slots and/or radiator ns.
6.2 Keep 25 cm (10”) free at all sides
7. High beam intensity. Never look into the light source.
8. Do not lift or suspend Light module or Power Supply Unit (PSU) by the cables.
9. Do not use any module or cable that has visible damage.
10. Connect the DS PSU unit only to a well grounded power supply.
11. Avoid contact with the LED elements, any pressure on the lens may dam-
age the LED element.
12. Connecting any equipment from other manufacturers to the DS LED Light-
ing System can damage both the DS system and said equipment. Any
such use will void warranty. Use the DS light modules only with a DS PSU.
13. The System is rated for indoor use only.
1. Safety instructions
1 | Safety instructions