User Manual

35
7 | Wi-Fi settings menu
The “NETWORK” row (e.g. “DS LightR”) is used to
identify the network name of a third-party router to
connect to. The network name can either be manu-
ally typed in using the rotary knob, or selected from a
scanned list of networks by pressing the OK button.
A scanned list of networks is displayed typically within
10 seconds. To perform a re-scan, gently push down
on the rotary knob.
Use Up and Down keys to select a third-party network
(e.g. “DS Light R”) and press OK to select it.
To enter the Wi-Fi password (if required), similarly to
other type-in operations, use the Left and Right keys
to move between character positions, and use the
rotary knob to select or remove the characters.
NOTE: The minimum length of a proper WPA pass-
word is 8 characters.
To save and activate the new Wi-Fi settings, using the
Up and Down keys, move down to the last row and
press OK. The settings will take effect within a minute
and the Wi-Fi module will automatically perform a
restart.