User Manual
34
7 | Wi-Fi settings menu
To save the settings for the selected mode
(“MASTER”or “SLAVE”) and return to the previous
menu, use Up and Down keys to move the highlighted
pointer to the bottom row (as shown in the picture),
and press OK.
Within a minute, the settings will be saved, and the
Wi-Fi module will then perform an automatic restart.
7.2.2 Wi-Fi module configuration as a SLAVE
To congure Wi-Fi module as “SLAVE”, one needs to know a third-party router
network name (an SSID) to connect to, and its password (if needed).
Enter the Setup mode as described above and use Left and Right buttons to
change the rst row from “MASTER” to “SLAVE”.
Use Up and Down keys to move to different rows and
use the rotary knob to change (rotate) or delete (push
down) various values.
The “NAME” row (e.g. “PSU 1”) is used to identify the
current Wi-Fi module. It is shown on the PSU screen
and in the iPad app.