User Manual

33
7.2 Wi-Fi module configuration
7.2.1 Wi-Fi module configuration as a MASTER
Wi-Fi module configuration menu is available only
when a Wi-Fi communication module is correctly
installed on the PSU, and properly secured.
By default, Wi-Fi module is in a MASTER mode, signi-
ed by the text on the screen. In MASTER mode, the
Wi-Fi acts as a router for an iPad.
On the Wi-Fi screen, a network name (an SSID) is
displayed, which is “DS Light” by default.
To change the MASTER mode settings, or switch to
the SLAVE mode, use Up and Down keys to select the
SETUP row, and then press the OK button.
MASTER mode settings are displayed.
On the rst row (“MASTER”), there are arrows point-
ing to the left and to the right. This means there are
other options available; in this case, one can switch
between the MASTER and the SLAVE mode.
To change the network name (an SSID) of the Wi-Fi
module, use Up and Down keys to select the NAME
row. Use the rotary knob on the PSU to change the
letters, and push the knob gently to delete the se-
lected character.
Use the “CHANNEL” row to select another Wi-Fi
channel, if needed. The value is changed by using the
Left and Right buttons.
7 | Wi-Fi settings menu