User Manual

6.2.3 Fan mode

The FAN row can be used to change the operating mode of the cooling fans for

the entire stack of PSUs.

• SLOW - fans are working on slow speed, however automatic fan speed regula-

tion is used when near-critical temperature is reached to prolong usage time

in extremely warm conditions.

• FAST - fans are working on high speed.

• FLEX - (Default) Automatic fan speed regulation. This is the recommended mode.

6.2.4 DMX channel assignment

The DMX CH row is used to assign DMX channel numbers to the selected PSU

or light module (depending on rmware version and the implemented DMX Mode).

• For MODE2 and MODE3, the values can range from 65 through 449 in 64

channel increments.

• For MODE4, the values can range from 1 to 481 in 24 channel increments.

For more detailed information regarding DMX, refer to the DMX implementation manual.

Use keyboard OK button or, alternatively, push the rotary knob, to activate the

NATIVE GLOBAL DMX MODE.

NATIVE GLOBAL DMX MODE - single PSU or stack is set to DMX native mode.

This mode stays on after power loss and ensures that PSU stays in DMX mode

until this mode is switched off by the user. This is the recommended setting for

the users who use DMX only, and especially permanent DMX installations.

6 | Light module status and settings menu