User Manual

28
6 | Light module status and settings menu
6.1 Light module status
Status part on the bottom displays the selected PSU
port light module data. It enables the user to monitor
light module parameters and ensure correct operation.
Example light module on the picture is connected to
PSU 1, light module port 2.
Light module type - RGBW or WHITE (White LEDs
only). (WHITE)
Light module cooling fan rotating speed - displays
fan rpm (revolutions per minute). (1230 RPM)
Light module temperature - displays light module
LED board temperature. (23 °C)
Light module up-time - displays duration (hours) the
light module has been switched on with above 0%
output. (243 H)
If the output port is not plugged in, a “NO LAMP” message is displayed for this
light module output port status.