User Manual

5.1.2 White only - white only LED modules

If all connected light modules are white only LED modules then white balance

mode becomes white mode.

Only one type of light modules can be connected to single

PSU or PSU stack. If RGBW and white only are connected

concurrently, the user is asked to remove the white only

lightheads.

Light intensity can be adjusted in range 0% to 100%

by 1% steps using rotary knob.

When intensity row is selected it is possible to use key-

board to set intensity.

Left arrow on keyboard will set intensity to 0%.

Right arrow on keyboard will set intensity to 100%.

OK button on keyboard will set intensity to 50%.

Rotary knob will change the value of intensity no mat-

ter which row is selected.

5 | Light control menu