User Manual

5 | Light control menu

5.1 White mixing mode

5.1.1 White balance - RGBW LED modules

When using the PSU with RGBW light modules it is possible to adjust color

using the white-balance settings.

Light intensity can be adjusted in the range from 0% to 100% in 1% steps by

using the rotary knob. (Intensity 10% on the picture).

When the intensity row is selected it is possible to use

keyboard to set the desired value.

Left arrow will set intensity to 0%.

Right arrow will set intensity to 100%.

OK button will set intensity to 50%.

Color temperature can be adjusted in the range from

1500 K to 10000 K in 100 K steps by using the rotary

knob.

Left and right buttons allow to switch between pre-

dened values of 1500 K (Warmest), 3200 K (Tung-

sten), 5600 K (Daylight) and 10000 K (Coolest).

+/- Green Tint can be adjusted from -30 to +30 also by using the rotary knob.

Adjustment step is 1 unit. Using the Left and Right buttons, one can switch be-

tween the predened values of -30, 0, and +30. OK button on the keyboard will

set tint value to 0.

In this menu, the rotary knob will always change the level of intensity unless

color temperature or tint row is selected.