User Manual

17
3.5 Light fixture mounting
A basic DS LED Lighting System kit includes 3 (three) RGBW LED light modules.
These modules can be joined together to form any size/shape combination single
light xture. Any module size light xture will need tripod mount.
3 | Installation instructions
Hold the tripod mount with one hand at
the center of the light xture side, and
slide in the module lock. One side of the
lock ts the center groove on the side
of the light module, and the other side
of the lock ts the groove in the tripod
mount. The lock washer should stay
ush with both the light module and the
tripod mount to ensure correct t.
If the lock does not t, use the supplied
hex key to further release the screw that
aligns the individual parts of the lock.
Tighten the lock to with the supplied
hex key. Do not overtighten.
Make sure that the tripod mount is
tightened correctly before attaching the
light xture to the tripod.
Do not remove the lock or loosen it
while the light xture stands on the
tripod mount.
When two or more RGBW LED light
modules are used to form a fixture,
mount the tripod mount as close to
center of balance as possible.