User Manual

14
3.4 Light fixture assembly
Parts list of an assembled single module light fixture:
• 1 RGBW LED light module
• 4 diffuser box sides
• 1 diffuser
• 2 small barn doors
• 2 big barn doors
3 | Installation instructions
Place an RGBW light module on a level
surface. The front of the module has a
metal lens frame that is used to hold the
sides in place. Slide in the rst diffuser
box side. A metal lip on the bottom
of the side ts inside the frame, and
a plastic clip is fastened to the outer
surface of the frame.
The arrow on the picture marks the
fastener clip area that is used to secure
the diffuser box side.
Push on that area to lock the side in its
place.