User manual

7
5. Photos and Images
You can view single images or play in a continuous slideshow as noted below. Images must be JPEG format to be viewed properly.
5.1 Viewing Photos
To Turn On the Digital Photo
Frame
Ensure that the power is connected as
described in Connecting the Power.
Press the Power button for three seconds
to turn the unit On.
When you turn On unit, it will
automatically display a splash screen while
booting.
After 3 seconds, if you do not insert any
media card, the screen will display the
message “Please insert media card”
When you insert the media card, it will
auto play from the card.
Press the “ Enter ” button to change
between Manual and Slideshow mode.
Press “Up” and “Down” buttons to display
the previous and next photos.
Thumbnail View
You can view photos as thumbnails.
While the display in Slideshow mode,
press “Enter” button to change to Manual
mode and press the “Left” or “Right”
buttons to switch to thumbnail preview
mode.