Specifications

C.16
Dimensional Drawings
C
GE Power Controls
Copperwork must be supported within 200mm of breaker connections – busbars or cables.
All connections to be tightened to 50Nm.
382 to door
Minimum clearance
to cassette side.
Fascia centre
Fascia centre
Connected 414
50 Disconnected
35 Test
ACB fascia
cut-out dimensions
The cut-out
dimensions give an
approximate nominal
clearance of 3mm
around ACB fascia.
These sizes are for
guidance and can be
scaled if a different
aperture is required.
Copperwork must be supported within 200mm of breaker connections – busbars or cables.
All connections to be tightened to 50Nm.
382 to door
Minimum clearance
to cassette side.
Fascia centre
Fascia centre
Connected 414
50 Disconnected
35 Test
ACB fascia
cut-out dimensions
The cut-out
dimensions give an
approximate nominal
clearance of 3mm
around ACB fascia.
These sizes are for
guidance and can be
scaled if a different
aperture is required.
Front Access Connection
Withdrawable Pattern
Type S - 4 pole - Frame size 1, In = 400A to 2500A (max)
Type S - 3 pole - Frame size 1, In = 400A to 2500A (max)