Specifications

For each band, the software retains the last visited frequency (+ mode, filter, tuner ) like a
band stack register but unrelated with those of your transceiver. The Mhz button displays a
numeric keypad from which you can enter a Frequency using the Mouse.
QMB
Buttons of QMB frame are related to Quick Memories.
Clarifier (RIT)
If available, Clarifier/RIT shift is displayed (+ R for RX shift and T for TX Shift). From the
Configuration dialog , you may chose between this function (Default) and function buttons
(Macro).
Tuning steps (ICOM)
If available, tuning steps of the transceiver may be selected from this frame. Please note the
corresponding selections do not have any effect on TRX-Manager itself. From the
Configuration/Preferences dialog , you may chose between this function (Default) and
function buttons (Macro).
Channels
The current memory channel in use is displayed and may be changed in one channel steps by
clicking the little arrows near the channel number : or by typing a channel number and
pressing C.
See also : Memory channels
Lock dial function
The LOCK button allows you to lock the main tuning knob to prevent accidental frequency
changes. But TRX-Manager is doing more by locking a particular VFO !. You may toggle from
the locked VFO A to the unlocked VFO B. That is particularly useful when working a DX in split.
Diversity
The F button (FT-1000/920 IC-7800 and Kenwoods) allows VFO B to Follows VFO A. Once
you engage this function, Offset between A and B remains constant.
OP function
By default, at startup, the Main Transceiver is the Operating transceiver. In conjunction with
a Sub-Transceiver panel, the OP button selects the Operating transceiver at any time and
Page 99