Specifications

may also take full control over your transceiver through a network using the real remote
control mode : TRX-Manager behaves exactly like if the com port is locally controlled.
A particular experience by Karsten DL1QC: CW keying using Remoterig and TRX-manager
This is my configuration: from operator to antenna-side: Cw-paddle -> Winkey -> laptop ->
TRX-Manager -> RRCMicro-DongRle -> Internet -> Remoterig RRC-1258 MkII ("Radio-modem") -> K3
-> Antenna
The character, generated by paddle-echo in the winkey-window of the trx-manager, is linked to the
tt-terminal of the K3-window. With pressed button "keyboard" from the TT-Window the character is
send as CAT-command to the remote-K3. With a latence from 500ms to 1000 ms the K3 is
transmitting. Using the internal loudspeaker of the winkey-device is necessary to achieve
zero-latency from paddle-pressing and generating CW-character. I muted the sound-monitor from
K3 to get not confused in sending CW.
Page 87