Specifications

output (Audio sound card and KXV3 required).

See also Synchronization with PowerSDR-IF or NaP3 using the K3 Synchro mode
(alternative to LP-Bridge)
K3/KX3 Graphic virtual control screens
K3 and KX3 have specific graphic control screens similar to their real front panels. Please
use External/Elecraft FP Submenu to display the virtual front panel. Functions are very
similar to the K3/KX3's front panel functions however difference may exist generally due to the
limitation of the protocol.
Tuning methods

Use left/right mouse clicks to turn the knobs to the left or to the right or the mousewheel
(if the control get focus).

RX Frequency tuning: use left/right mouse clicks on the RX Frequency digits while holding
the mouse buttons or use the mouse wheel

Tuning using the numeric keypad is supported

K3: if the PAD button (near VFOB Knob) is pressed the numeric keypad tunes VFO B
Position and appearance

This window opens outside the main window so that you can move it to another screen.
Because of the use of a true graphic display, this windows is NOT resizable. However, the
size must fit any screen (width<1024px).

The window stays On Top depending on the state of the TOP button.

In case of difficultis to restore this window from the taskbar, please use the
TRX-Manager's Windows menu.
Remote control
Like all other transceivers, your Elecraft may be controlled through a LAN or the Internet using
the standard remote control modeof TRX-Manager, but with limited functions. In addition, you
Page 86