Specifications

The SUB button toggles the active receiver. If the sub-receiver is active, all controls and
displays (Levels window included) are related to the sub receiver.
The TF-Set function (TFS Button) is supported. In addition, if you give the focus to the TFS
button (by pressing it), the keyboard's space-bar toggles the TF-Set function ON/OFF.
REV (Reverse) is related to CW/FSK/PSK and SSB Mode (USB/LSB). DAT allows cycling
through the three data mode (D1-D3).
Auxiliary Meter
From the Monitoring, below the S-Meter, select KENWOOD to display the auxiliary meter
values. You may select the current meter using the MET (METER) button of the Levels
window.
Reading VDD
PTT
The TS-990 offers two modes of operation for PTT switching: PTT for MIC Input (TX0;) or
PTT for ANY input (TX1;). By default TRX-Manager uses TX0; If your audio line is connected
to the accessory jack, you have to set up a macro (TX1;) for keying SSB.
Memory channels operation
TRX-Manager allows switching to the current memory channel mode : use the small arrows
near the C button to choose the current memory channel and press C or A/B to toggle
between the memory mode and the VFO mode.
This version of TRX-Manager does not support reading/writing files of memory channels.
Levels window
The levels window allows controlling most of the critical functions. The labels being sometime
small, please use the "touch help" to understand the meaning of the labels.
Sub Receiver
The Levels window controls the operating receiver. If the Monitoring's SUB button is pressed
(or if the Sub Receiver is active), the Levels window control the sub receiver's levels. All
display and commands are related to the active receiver.
CW Keyer Memory (KM1-5)
TRX-Manager uses the Message TEXT type. You can store data into the memory keyer using
the SET button (only messages 1-5 are supported).
Remote control
Page 78