Specifications

internal electronic keyer of your transceiver,



A Memory function of the DSP filters is featured,



The Pitch=Shift button shifts Pitch and IF-Shift simultaneously

Please note that TRX-Manager supports direct CW Keying of the Transceiver via the CAT port.

You have to check the Internaloption (Setup/TRX tab) to enable direct CW keying via the

CAT port (see also CW Interface).

Scan Tab

The Scan tab provides settings of the transceiver's scanner. Conventions and functions are

the same as those of the transceiver's manual. It is recommended that you read this manual

to understand the different scanning modes.

Misc tab

The Misc tab provides setting of the TS-2000' internal TNC. The Misc tab also provides RF

Power setting and Antenna selection.

Satellite mode (TS-2000)

The SAT module opens from the Tools/Satellite submenu.

TRX-Manager switches to Satellite mode by clicking the satellite (SAT) button

Once in Satellite mode, you can set up the Downlink or Uplink frequencies from the Edit/VFO

(F2 key) or Edit/Split (F3 key) submenus. Setting up the satellite name is possible from the

Edit/Info (Ctrl-I) submenu.