Specifications

Operation with FT-757GX
This section applies when using with the FT-757GX Transceiver only (and not the
FT-757GXII).
The FT-757GX has very few number of CAT control commands. Notably, it is not possible to
read the transceiver status (selected frequencies, modes…) and it is not possible to set the
mode from the computer!
The only CAT commands are : frequency selection, memory operation, toggle from A to B,
Band up/down by 500 Khz step.
TRX-Manager was modified to work with this transceiver the best as possible. But note that
any change made from the FT-757GX is not displayed by the computer.
When opening the monitoring windows for the first time, the frequency is 0 MHz: select any
valid frequency from the computer to synchronize both displays.
The Short Wave data base and Web cluster operations are possible but you have to select
the mode manually prior to selecting the new frequency from the computer!
Page 55