Specifications

Each time the program sends EDSP CAT commands to the rig, the word EDSP will be prompted
in the receive or transmit window.
When you close the RX or TX EDSP windows, the program stops controlling the EDSP.
The TX-EDSP window also allows you to control the FT-1000MP internal electronic keyer and
displays some meter data.
For better results
We suggest you follow these instructions before starting the CAT EDSP control:
1.
Open the Tools/EDSP/Defaults dialog box
2.
Enter the exact same settings that your current EDSP settings are.
3.
Click OK
4.
Open RX or TX-EDSP windows
5.
Click the Default button
6.
You are ready to use the EDSP control.
Possible problems
When testing the FT-1000MP, we found some malfunctions or incompatibilities in either the
CAT commands or with some menu settings (it may depend on your ROM version):

CAT RX EDSP OFF command doesn't work if RX-EDSP is ON and gives undesirable result
(TRX-Manager does not use this command)

CAT RX EDSP AM/SSB-W/SSB-N doesn't work if RX-EDSP is OFF and gives undesirable
results.

CAT TX-EDSP OFF command has a bug (but we found a fix)

CAT FSK AF filter not working

CAT AF audio equalization - bank 4 not working.
Note that you may experiment yourself with the EDSP CAT commands by referring to the
Yaesu manual and using the CAT Commands window.
In some cases you may have a loss of audio (especially with RX-EDSP settings). Don't panic,
you just have to switch EDSP ON/OFF from the rig. The TRX-Manager's interface should help
you to avoid these conditions and to enjoy CAT EDSP control!
Page 54