Specifications

Yaesu transceivers
Related Topics

FT-990 ROM1.2, FT-1000 V5, FT-747, FRG-100

FT-1000MP

FT-757GX

FT-767GX

FT-817/857/897

FT-847/736/212/412

FT-980

FRG-9600

FTDX3000 FTDX5000 FTDX9000 FT-2000 FT-950 FT-450
General remarks
YAESU transceivers are very different from one model to another. Consequently, many
functional differences are possible depending on the transceiver selected.
Please note the following functional differences between some Yaesu transceivers:
• The generic Yaesu selection for "transceiver" should run with various (but OLD) Yaesu
transceivers or receivers but with limited functions (setting of frequency and mode only - no
monitoring). Except for special needs or tests, do not select Yaesu but the exact model of
your transceiver.
•With FT-847 FT-736 FT-212/412, FT-767GX FT-980 to be under CAT control you must
press the CAT button (located on the main toolbar) or the F9 key.
• Early FT-990 and FT-1000 firmware versions (prior to rev. 1.3 or V6), FT-747 or FRG-100
do not allow a constant communication with the PC. Please read the section about FT-990
ROM1.2, FT-1000V<6, FT-747 and FRG-100 for more information.
•FRG-9600, FT-757GX, or FT-736 have limited functions. Please see the corresponding
sections of the help.
• FT-757GXII allows using all the functions of the program but editing the memories,
changing the frequency or the mode is not possible when in MEMemory mode.
•With FT-817/857/897, FT-847 or FT-100 it is not possible to read/write the internal memory
channels of the transceiver : memory channels implemented by TRX-Manager are virtual and
not related to the channels of the transceiver. The FC-20 and FC-30 antenna tuners are
not compatible with the CAT system.
Page 50