Specifications

IC-R75
- IC-746Pro : fix for Channels in FM/Split
- Quick Split : Split Memory
- Memory channels : function for clearing all memory channels in one click (Icom and Kenwood
only)
- ICOM : option C00 (Setup) if the first channel is #00
- Remote control(Packet) : RC command to automate a reconnection
- Logbook : (true) fied for Station (Transceiver) added. If a layout has been created for
your current database (file with .grd as extension), it is recommended you delete it in order
to display the new field under the Listing tab.
• V 3.4.2
- Rotators : Support for AlfaSPID Rotor
- Remote control : Internal tuning (step by step) supported for more precise tuning
- Joystick control
• V 3.4.1
- Support for Yaesu VR-5000
- Support for TS-711 and TS-811
- Satellite : support for SATEL939
- Logbook : QSL_RCVD field : S mark for "submitted" supported.
- Monitoring two rotators simultaneously supported
- Terminal (Auto QSY) : Option for All, Needed, New One
- Sound announces : option to play a wav file for a needed (only) country, priorities between
wav files revised
• V 3.4.0
- Band decoder : new driver to support customized LPT port under Windows 2000/NT/XP.
- FT-847 : CAT ON at startup fixed (again)
- Logbook : Mode on 3 digits (only if you create a new database)
- SW Listening : Support for ICOM with 3 filters
- Prop. prediction : indication for Sun Set and Sun Rise, WWV announcements
- Commands pannel : Scanning dialog updated (range)
- FSK mode selected when RTTY appears in the comment of a DX Spot
• V 3.3.6
- FT-817/847/897/757/747 : improvement of speed (especially FT-817/897)
- Remote control: Specific command for TX in Split
• V 3.3.5
- Commands Panel : Improved accuracy of the display between 100 and 160 MHz
- FT-847 : CAT ON at startup (fixed)
- Remote control : Setting up TX if split changes RX with FT-1000/920 (fixed)
- IC-7400/746PRO IC-756PRO2 : Transceive ON at startup
• V 3.3.4
- DXCC Summary : calculation of the bandpoints, more detailed reports
- Logbook : Logging OFF for a selection of QSO
- IC-R8500 : improved support
- Support for FT-897
- Database Grids : new system files (fixes)
• V 3.3.3
- new Prefixdatabase much more accurate (2800 entries) resolving CQ, ITU Zones and
provinces; derived from DXAtlas courtesy of Alex VE3NEA (please run Tools/DXCCUpdate
Page 414