Specifications

The relative position of the Main bandwidth indicator shows the IF Shift value, but the relative
position of Sub bandwidth indicator does not follow IF shift since this parameter is not
available via CAT. The Sub markers does represent the correct sideband and bandwiths,
however.
YAESU FT-950/5000 (and TRX-Manager)
Main VFO markers represent supported the correct BW and IFShift in SSB/CW/FSK (AM/FM use
standard values). However, Sub BW=Main BW by default.
TRX-Pan (and TRX-Manager) with other transceivers
Bandwidth markers use standard values (SSB 2.4kHz, CW/Data=500Hz, AM=6000Hz,
FM=12000Hz).
MAX/AVG
Allows integration of maximum/average values of the signal for the number of Samples
defined in the preferences. PEK (PEAK) freezes the display on maximum values. If QSY
Detect is checked (options), integration is disabled (to NOR) during rig tuning. BPH
(Background Peak Hold) allows signal peaks beeing displayed in background.
Full screen mode
Click to toggle Full Screen mode. In full screen mode, please type Escape (keyboard) to go
back to the normal screen and +/- or Z for zooming or use Left (Zoom) and Right (Screen
mode) mouse clicks outside of the grid.
Spot
After tuning to a signal, clicking the spot button will center it in the passband. It is designed
mainly for CW and AM, but works pretty well even in SSB. If there are multiple strong signals
in the passband, it will center the strongest one.
Peak S-Meter
A peak/S-meter displays values is S points and db above S9.
MouseWheel tuning
Keyboard shortcuts A/B and F/S allows you tuning Main VFO (A) or SUB VFO (B) and choosing
Fast Tuning (F=10XStep) or Slow Tuning (S=Normal). Please note mousewheel tuning from
TRX-Manager is always faster than from TRX-Pan.
Waterfall
Off, 1/4, 1/2 allows you splitting the screen to your convenience.
Macro buttons
Page 384