Specifications

TRX-Pan

A Panoramic Spectrum Analyser for SDR TRX-Pan is delivered with TRX-Manager (*) ; it is

an external program accessible from the TRX-Manager's Externalsubmenu. TRX-Pan can work

with a software defined wideband receiver with I/Q output and a fixed center frequency (like

Softrock) or a SDR centered on the IF local frequency of your transceiver controlled via CAT

with TRX-Manager (like LP-Pan). In both cases, TRX-Pan provides real-time Spectrum Analysis

and interactivity with TRX-Manager via OLE. TRX-Pan only supports Windows drivers.

It is fun to use even with an inexpensive Softrock SDR with a limited bandwidth centered in

the 40m band connected to an RX antenna while TRX-Manager controls your transceiver on

the same band (Warning: disconnect the SDR before keying down !).

TRX-Pan (with and IF Adapter and TRX-Manager) is optimized for Elecraft K3 Yaesu FT-950

and Yaesu FTDX5000 transceivers but can be used with any transceiver supported by

TRX-Manager with more limited features (bandwidths are fixed to standard values in that

case).

TRX-Pan is a also distributed with LP-Bridge by Larry N8LP (**) and is compatible with

N4PY software .