Specifications

OLE Overview
TRX-Manager is able to communicate with other programs via the Windows OLE feature. This
idea was introduced by Dennis WN4AZY, author of the powerful LOGic logging program, links
TRX-Manager and LOGic.
Supported programs
TRX-Manager is able to be controlled from the following programs:

LOGic by Dennis WN4AZY, a comprehensive logging program

HAMSCOPE by Glen KD5HIO a program for digital communications

MULTIKEYER by Glen KD5HIO a CW Keying program

Voice Keyer Express by Stu N7QJP, a digital memory recorder

Swisslog by Walter HB9BJS an other powerful logging program

a Screen saver and a test program (FT-Control : see below)

TRX-Meter (High precision S-Meter)

TRX-Synchro TRX-Acom (Synchronizes two transceivers, SteppIR, Alpha amp, ACOM
amp.)

TRX-Command (Sends user-defined commands or macros to your transceiver or your LPT
port)

TRX-Pan an SDR Decoder

LP-Monitor and LP-SteppIR by Larry N8LP to control remote relays, rotors, over serial ports
and/or IP, SteppIR beam...
Setup
OLE Link is automatically enabled by TRX-Manager ; there is no specific Setup.
Please note that, when TRX-Manager is minimized, the CAT communication stops. You
may wish to disable this ability to keep the benefit of the Automode feature : the solution is
to avoid minimization of the TRX-Manager's main window.
License for the OLE-Link
Running the link requires a properly installed version of TRX-Manager and requires the same
license information.
Testing the link
With TRX-Manager two programs are distributed to demonstrate the OLE Link:

FT-Control : this program allows you to test the OLE ability. You may run as many
instances of FT-Control as you want. The current operating conditions are reported into
FT-Control every 3 seconds, and you may select your operating conditions from the
FT-Control window.

TRX-Synchro.exe : this program controls and synchronizes a second Transceiver (only
ICOM and some Yaesu) with the Transceiver under the control of TRX-Manager.
Page 375