Specifications

Automatic identification of SW stations
A powerful and easy to use function is the automatic filtering functioning with the Monitoring:
this function provides automatic identification of the stations around the current frequency :
when this button is pressed, the program only displays stations whose frequency = current
frequency X (X is adjustable from the combo) : . It is also possible to
combine this automatic filter with a manual selection.
Note

This function is available only if the monitoring window is open

Please make sure of the regional settings on your computer (Number tab). Dot "." is
recommended as the decimal separator. If Comma is selected as the decimal separator, you
may have difficulties selecting or entering frequencies.
Tip
Now, if the station is identified... just press the Google Earthbutton (if installed) and you can
have a view of the big antennas!
Page 346