Specifications

Scanning the SW Database
This section describes manual and automatic scanning capabilities of the database.
Tip
During scanning, please make sure to unlock the transfer of frequencies to the transceiver (
button not pressed)
Scanning manually
A single click of a record (any click in the corresponding line) transfers the station's settings
to the transceiver ; if geographical data (longitude, latitude) are available, direction and
propagation predictions are displayed from the DXCC window.
Depending on your own preferences, you may choose to ignore the mode of the database by
checking the No-Mode button . I.E : you may prefer listening all broadcast stations in
SSB... or keeping the current mode and filter.
From the keyboard
If the grid is locked, pressing the space bar scans the database ascending.
Scanning automatically
Auto scan is provided by using tools bar buttons . The scanner delay is defined
under the Transceiver tab of the Preferences. Pressing the space bar stops the scanning.
The S0-9 combo defines the S-Meter threshold which pauses scanning.
Scanning may also work with the sound recorder.
Page 343