Specifications

Context menu provides various functions
A description of the message window is provided below. Refer to Sending/Receiving
messages and Group messages
Tracking a Callsign is possible using the DX-Tracking function.
Uploaded data
Data is sent to the WOTA server (1) when you connect to the database, (2) at five-minute
intervals or (3) on demand. The following fields are sent to the server.

your Callsign

your Operating frequency and mode

your Comment (you may add or remove this comment to/from your favorite
comments from the Select menu)

your geographical data: Grid, State (PAS), QTH (SAS), Longitude and Latitude. (This
data originates from the Software/Location preference panel. Check the accuracy of this
data. You can view your position on a high precision map located at
http://71.198.184.113/newwota/WotaMap.aspx)

your software and version (TRX-Manager!)

your CQ and ITU zones

your Message Groups
If you change any of these data fields after you are connected, you may force an upload by
using the Upload button (do not abuse).
(*) Mode is transferred as a comment using the ADIF format. Not all programs support
Mode.
Settings
Some settings can be defined from the WOTA's Preference dialog box :

your Callsign (only if you use an unregistered version of the program). Please note
TRX-Manager always uses the registered callsign at startup,
Page 338