Specifications

Troubleshooting guide: Installation and use
Please read all!
This section summarises the most frequent problems (communications excepted) encountered
during the installation or the use of TRX-Manager. Please read ALL!
How to delete and change parameters without opening TRX-Manager?
If you can not open TRX-Manager because of wrong settings and errors at startup, you can
delete or change some parameters without running the program.
TRX-Manager stores all parameters and settings in the Registry. The little program called
TRX-Tools.exe and delivered in the TRX-Manager's main folder allows you doing some
operations on parameters without running TRX-Manager or opening the Registry. See also
Saving your parameters.
About the system
To run this software, the minimum required version is Windows 95 SP1. TRX-Manager has been
tested on all versions of Windows up to Windows 8 32 bits and 64 bits.
Crash during installation
In case of a crash during the setup process please make sure to exit all software (anti-viral
software included). A crash often occurs because Setup can not update the DLL loaded in
memory by other software.
Please note that 256Mb RAM is the minimal requirement on Windows 95/98, 1MB on XP and
2MB on Vista and later.
Error messages during installation
To install and update TRX-Manager under Windows Vista/Win7/Win8, you must have
administrator privilege .
Please make sure your system is up-to-date. In some cases, an error message appears
because certain of your system files are out-of-date and incompatible with those necessary
for the installation of the program. In theory this problem should not occur if your version of
Windows is higher than 95 + SP1 and very rare since XP.
In certain cases, a system file may be failing to register because the file may be locked (in
use) at the time of file transfer. Files that commonly have this problem should be registered
upon reboot of the system.
Page 31