Specifications

Using TRX-Manager and CW Skimmer together (Telnet Link)
Note
Please launch TRX-Manager BEFORE CW Skimmer (to prevent CW Skimmer from opening the serial
port).
Please open the TRX-Manager's Terminal and under Telnet 1 or Telnet 2, connect CW
Skimmer. In a local network, Host is always localhost:7300
Connecting CW Skimmer
Now TRX-Manager populates CW Skimmer's Spots (like other spots) ; if you set CW Skimmer
on a new frequency, TRX-Manager populates the callsign and set up your transceiver in
synchro with CW Skimmer.
Possible problems

if you note a shift between TRX-Manager and CW Skimmer, please adjust the Offset (Hz)
parameter under Preferences/Terminal until both programs are synchronized. If frequencies
are reversed, swap I/Q channels under CW Skimmer's Audio tab.

relative positions of Spots may be shifted between TRX-manager and CWSkimmer with
Softrock-IF setup.
Page 236