Specifications

Sending CW
TRX-Manager provides a small terminal (Tools/CW Keyer) for transmission (but not the
reception) of Morse code. You may use :

The TRX-Manager's CW generator: TRX-Manager keys the RTS or DTR line of a serial
port or the Select line of a parallel port. A specific but inexpensive switching interface is
required between the com port (or LPT port) and the Key line of your transceiver.

A Winkey Keyer

The Internal electronic keyer (CAT) of the TS-480/570/590/870/990/2000/K2/K3/KX3
transceivers
You configure the CW Keyer to be used from the Setup dialog.
Related Topics

Elecraft

TS-2000/570/480/590

TS-990S

Winkey

CW Skimmer Interface
From this interface, you:

compose messages, send them immediately or store them in memory

send CW messages in line mode (the message is sent after the Enter key has been
pressed)

send message in character mode (each character is sent immediately after being typed)

have a quick access for logging

can use macros
Support is provided for special characters, CQ sequencing, control of the TX line
Interface
Page 217