Specifications

Connect (*) : RC 0-1 (Packet: connection, RC1 enables S1/S2 buttons) TRX0=RC1;
IP(disconnects user only)
Scanning : SG 0-1
STEPPIR : SRx (x: H=HOME, I= INTERFACE, S=SET, 0= AUTOOFF, 1=AUTO ON,
C= CALIBRATE, N=NORMAL, B=BI-DIR, R= 180°, 3=3/4W, P= POLL)
WATCHDOG : WD 0000-3600Watch dog delay
BAND : BDJ J=Band 0-13
PASSWORD : PAXXXXXXXX; XXXXXXXX= Password (caps ON)
UPD LVL (*) : UL (update levels)
CAT Cmd : CM (reserved)
CAT Status : DT (reserved)
Type TRX : TY (reserved)
TRX-Command : MA (reserved)
Meter : ME (reserved)
OLE Data : OL (reserved)
Message : MG (reserved)
(*) These commands are not generated by the program and must be introduced
from the keyboard.
The parameters are as follows:
Page 203