Specifications

Remote control operation
The Remote interface of the Remote TRX window is simple to use and allows controlling
most of the functions of the Remote station.
Summary of the main steps
1.
Configure TRX-Manager from the base station (SERVER) as if remote control is not used
(remote control NOT enabled) and make sure all is working perfectly (locally: you must be
physically present)
2.
Install TRX-manager on the remote computer (CLIENT) and configure both instances of
TRX-Manager (CLIENT and SERVER) for the standard mode of control as described in THIS
section of the help
3.
Please keep the defaults settings for your first tests with NO password or Watchdog.
4.
Make sure all is working and you are able to control remotely all elements of the station (with,
of course, some limitations inherent to the remote control mode)
5.
Eventually, consider configuring TRX-Manager for the real-mode .
Remote control interface
Transceiver control
The remote control interface is generic to be able to work with all the different transceivers
that TRX supports. The commands available being very different from one transceiver to
another, please see your transceiver manual to check the availability of certain commands via
Computer especially the ability to switch to TX via the serial port, VOX control...etc.
Page 194