Specifications

The Transceiver/Remote TRXsub-menu opens the remote control window which allows
setting up your network and controlling the remote station (Transceiver, Rotor, CW Keyboard,
SteppIR) through a generic interface.
Limitations
TRX-Manager allows control of virtually all elements of your remote station, economically,
without any other equipment than a second networked computer. It's a fun experience and
quite effective in DXing.
That said, interactivity is necessarily limited compared to the use in local control mode.
Supported features are less extensive and limited to the display of critical data and/or to the
control of your remote equipment using a keyboard: transceiver, rotor, keyer...
There are also efficient other solutions such as: serial port servers, Remoterig... generally also
compatible with TRX-Manager. Which method works the best depends on the transceiver that
you are using, other elements of your station and the speed and reliability of your network.
Important
Generally, unless stated (of course and especially in the other sections of this help), all the
functions of TRX-Manager described in the documentation apply to a local control mode and NOT to
a remote control mode. The remote control mode is specific. All modules are not always usable in
remote mode.
Page 187