Specifications

TRX-Acom
TRX-Acom software computer controls the ACOM2000A automatic amplifier manufactured by
ACOM.
TRX-Acom.exe is distributed with TRX-Manager; it may be executed as a stand alone program
but installation of TRX-Manager is required.
TRX-Acom is usable through the Internet using a serial port server. However, Auto-Tune
function may give undesirable behavior if speed of your connection is too low. Also the ON
function may be difficult to support.
Warning
While this program has been carefully tested by Stan LZ1IU ACOM's developer, please consider
this tool as an help to use your amplifier from a computer and NOT as a replacement for the RCU.
Depending on state of your amplifier, data history, changes and quality of the communication,
information displayed may be wrong and commands not properly processed.
Please launch TRX-Acom.exe located in TRX-Manager's main folder (or from Start menu).
Click Setup to choose com port and press Connect to connect your amplifier.
ON function requires a cable wired for DTR and RTS. You will also need an adapter, inserted in
the RCU-AMP and PC_AMP connections on the rear panel of the amplifier: please contact
ACOM for details and availability.
Note
Status of the RCU displayed by TRX-Acom may be wrong if you connect your amplifier while it is
already ON: it is recommended you first connect your amplifier and then switch it ON while it is
connected to TRX-Acom.
Page 183