Specifications

Linear-Reminder - Settings
The Linear Reminder module allows numerous settings and configurations. From the Linear
Reminder window, click to open the Linear-Reminder's settings dialog.
Settings dialog
Preset values

TUNE, LOAD, USR1, USR2 preset values for each segment: please select a segment by
clicking it in the list and edit it by filling in the corresponding text boxes with appropriate
values. OPR check box activates (or not) the relay for the selected segment. Press to
save the values.

USR1 and USR2 labels may be modified by clicking in the corresponding labels. If you left
USR1 or USR2 blank, corresponding preset values will not be displayed from
Linear-Reminder.

V> button reads the transceiver's frequency: the corresponding segment will be
automatically selected and highlighted while you are changing frequency of your
transceiver.

>V button transfers the middle frequency of the selected segment to your transceiver.

Tune F. and Tune tunes at full power or reduced power (depending on your options).
Tip
Thanks to the V and Tune buttons you can edit the whole spectrum and test your values while
you keep the Settings dialog opened (don't forget to cool down your amplifier after a Tune!).
Default power
This frame define the default power for TUNE F

Preference: according to your options defined from the Preferences
/Transceiver/Rotator...
Page 176