Specifications

Automatic mode switching
By checking Auto Mode, automatic mode switching is selected by default at startup. It is
always possible to activate/deactivate this function from the Monitoring window (Auto) or a
Sub-Transceiver panel for a particular session.
The Backlash field (in Hz) prevents from quick and unstable changes of mode near the limits
of two segments. Generally 1000Hz is enough.
Restoring the default Bandplan
If the Auto mode is malfunctioning, your bandplan.csv file may have been altered. You may
have to select your Region again by opening one of the Region*.csv file or the IARU button.
This action erases any previous version of bandplan.csv.
Miscellaneous settings
Under the Rotator/../Misc... tab of the Preferences you may assign a different Rotor and
depending on your transceiver (*), Antenna, TX Power, Tuner or Linear amplifier options for
each HAM band. If TX Power is blank, the program does not set any value.
These settings are saved for each transceiver separately (TRX1-4).
(*) they are direct commands which are not supported by all the transceivers.
DX Squelch
If AF gain control is supported by your transceiver and according to the status of the Main
toolbar's Tools/DX Squelch button , AF is muted after a given period of inactivity. The
specified delay can be defined under the Band Plan tab of the Preferences. AF Gain is set to
its previous value as soon as you set a dx-spot or you change the frequency.
Page 149