Specifications

Macro buttons
The Monitoring, Sub-Transceiver and Remote windows have configurable Function buttons
(or Macro). The Monitoring window supports up to 30 macros.
Not all transceivers support macros: generally all Kenwoods and ICOMs, Elecraft and recent
Yaesus (FTDX9000 and later) support macro commands.
See also

TRX-Command (which allows sending powerfull macro commands) via OLE to TRX-Manager.
Displaying the macros
From the Monitoring, make sure the layout is configured to display macro buttons; if Macro
buttons are not visible, please click the Monitoring's Configuration button to open the
Configuration dialog.
Buttons options may differ depending on your transceiver. TRX-Manager offers 8 or 7+ 23
macro-buttons. In the case of 30 macros, button #8 (...) becomes a toggle between macros
#1/#7 and #9/#31.
Monitoring screen with Macros enabled
Left : 8 macros only
Right: 7+27 Macros (more macros selected) + a toggle (...)
Setting up a macro button
At startup, captions of Macro buttons are blank (no label). To set up a macro: please right
click a macro button and choose (in the dialog) either a pre-defined Function or a CAT
Command.
Page 144