Specifications

How to change the modes ?
TRX-Manager provides important functions to automate the selection of modes and filters
according to your preferences.
The Auto-mode function
Eventually, you don't need to change the mode: the software does it for you by reading the
the Band Plan!
By default AUTO-MODE is selected at startup but can be unselected at any time from the
AUTO button (Monitoring's or Sub-transceiver's panels).
AUTO Mode activated
By default, AUTO-MODE is ON at startup. If you don't like this feature, please uncheck the
Auto Mode option under Preferences/Transceiver/Band Plan. AUTO-Mode will be OFF at
startup.
Notes

If a memory channel is selected from the main transceiver (mem is displayed) auto-mode is
always OFF (Manual).
In case of the mode is unstable
If the Mode is unstable ?
Depending on the transceiver and especially variations of the Shift between modes (SSB/CW),
mode may be unstable between two sub-bands. Activating Manual mode is a possible solution.
However, the BackLash parameter from the Preferences/Transceivers/Band Plan tab adjusts
the change of modes between two sub-bands and eliminates this behaviour.
In addition with Yaesu Transceivers, you may try setting up the shift between SSB and CW by
adjusting the Pitch (or the CW/SSB offset) from the Preferences/Transceiver tab… The pitch is
generally between 500 and 700 Hz.
Also, please check if a special parameter of your transceiver allows setting up to OFF "frequency
corrections" between SSB and CW... (as it is possible with Yaesu and Kenwood transceivers).
Setting up the Preferences for Filters (main transceiver)
Page 141