Specifications

Other functions
Band selection
For each band, the software retains the last visited frequency like a band stack register but
unrelated with those of your transceiver.
Direct entry of Frequencies
Direct entry of frequency is provided from the Band switch (in MHz):
A Left click on >RX sets up the receive frequencies while a right click sets up the transmit
frequency (TX).
Tuning steps (TS+ TS-)
Tuning Step is memorized for each Transceiver and each mode. A clic on TS+ or TS-
increases or decreases the tuning Steps respectively for Fast and Slow scannings.
OP function
By default, at startup, the Main Transceiver is the Operatingtransceiver. In conjunction with
the Monitoring, the OP button selects the Operating transceiver at any time and very quickly
during a session.
Function buttons
Four Function buttons are user-definable.
Sync
The Sync button synchronizes a Sub-Transceiver with the Main Transceiver for RX or TX.
Drag and Drop
A drag and drop from a sub-transceiver can be initialized from main display (just below the
frequency):
Page 132