Specifications

Files format
When you save memories (from the Transceiver menu) the software creates a file with the
name of your choice and extension .mem as default. It is a text file. It is compatible with any
transceiver supported by TRX-Manager.
The content for each line is 13 data's separated by comas (, or ;) in this order :
. frequency in MHz (0= > Clear, -1= > Skip
. clarifier value in kHz status for tx clar
. status for rx clar
. status for +RPT
. status for -RPT
. status for Reverse
. status for SCAN (0 include 1 skip except FT-920)
. status for HIDE (2 unhide 1 hide)
. tuner (FT-920 only)
. status for mode (same format as band.dat)
. status for filter (0>2.41>2.0/2>500/3>2504>6.0)
. channel information (label)
. repeater offset (KHz)
. CTCSS frequency (Hz)
. Encoding (0=no 1=yes)
. Decoding (0=no 1=yes)
. Group (TS-2000 only)
BEACONHF.MEM and BEACON28.MEM are two files delivered with TRX-Manager with HF
beacons.
You may create or edit the file under MS Excel and save it as CSV which matches the mem
file format.
Page 126