Specifications

corresponding digits.
Variable Scanning
By holding the left mouse's button and moving the mouse pointer on the right or the left of
the cursor you engage a scanning feature for which the speed (or tuning step) is variable and
is a function of the distance between the mouse pointer and the cursor. The scanning stops
when the mouse button is released.
Progressive scanning
Hold the mouse button
By moving the mouse pointer during scanning from one side to another of the cursor, you can
tune your transceiver in a way that is almost as convenient as with the tuning knob.
Tuning buttons
For most transceivers, the program implements the incremental tuning of the transceiver (if
supported). The tuning direction depends on the selected arrows OR the depressed mouse
button : the right mouse button reverses the tuning direction.
For the other transceivers (if incremental tuning is not supported), you can use the arrows for
a quick increment (standard step depending on mode) or, you can display and then select a
specific frequency by holding the mouse button.
Page 111