Specifications

Graphic tuning
In the lower part of the Monitor Window is an advanced - mouse sensitive (when highlighted)
- tuning control. The combo box (on the right) lets you to define the Range (in KHz) of the
control (shortcuts PgUp/PgDn).
Tuning by moving the cursor
The cursor can be grabbed with the mouse ; it is divided into two parts : the lower part tunes
over the full range of the tuning control. The upper part fine tunes around the current
frequency.
Large or Fine Tuning
Tuning by using the Mouse Wheel
When the Monitoring is highlighted, the mouse wheel can tune the frequency. The Tuning
Step is variable according to the state of the INC function:

INC NOT activated : the step is 1/1000 of the total range (Range=100K -> Step = 100Hz)

INC highlighted : the program uses the Step you define under the menu which opens
when you right click the INC button (activated) :
Auto Checked : the program implements (if supported) the incremental tuning of
the transceiver (= Microphone's Up/Down button) which gives progressive tuning.
Whatever the range or the mode, this selection provides fine tuning. If your
transceiver does not support incremental tuning, the program uses a standard
step (10Hz or 100Hz).
Auto Not checked : the program implements the step you select under this
menu. This selection is saved mode by mode (i.e : Auto for CW, 10Hz for USB,
12.5KHz for FM...).
Round Off : if checked, the program rounds off the frequencies (according to
Step).
Step menu
When the digits of the RX frequency display are highlighted, the mouse wheel tunes the
Page 110