Specifications

the signal values for the last 30 seconds.
Auxiliary Meter (E-Meter)
If feedback of meter data is supported by your transceiver, please choose the value to be
read (SWR, Po, ALC ...) in the combo box: an additional indicator (analog) or
bargraph displays measurement of SWR/COMP/ALC... during transmission.
In addition, different other choices are possible:

OLE: to read data sent by a third party program such as E-Meter by N8LP

ACOM: data sent by TRX-Acom

LP-100 ALPHA W2: data sent by a digital wattmeter LP-100 & LP-100A or
ALPHAPOWER (4500) or Elecraft W2 to configure under Setup/TRX1. Power and SWR
are displayed. A white bargraph shows power by scale automatically adjusted to
25/250/2500W (LP100). See also Linear-Reminder.
Page 106