Specifications

S-Meter and Multi-Meter
The S-Meter of the Monotoring features two modes of operation/three appearances to be
selected from the Transceiver/Layout dialog. All colors of the s-meter are customizable
from this dialog.
You may also toggle from one type to another by clicking the s-meter.
The S-Meter values are not displayed (or irrelevant) during a frequency change.
Related Topic

TRX-Meter: High precision S-Meter
Calibration
You may calibrate the software's s-meter in accordance with the s-meter of your
transceiver: this calibration is done from the Preference/transceiver tab dialog box
(S-Meter frame) by moving the dedicated slider.
S-Meter : Bargraph or Analog mode
The S meter value is indicated in microvolts (S9 = 50 µV below 30 MHz, 5 µV above 30 MHz).
The Analog mode is displayed by default at startup. The linear scale (0-10) displays the
auxiliary meter values (see below).
The Bargraph mode features a peak hold function. The maximum s-meter value is displayed
and will be reset when beginning a new frequency change or after 2s. An auxiliary bargraph
displays the auxiliary meter values.
S-Meter : Scope mode
This mode can display a graphical representation of the signal vs. time. The s-meter displays
Page 105