Specifications

Split operation
Various functions make Split operation much easier...
Quick Up/Dn function
The Monitoring's Quick Up/Dn function allows you switching Split by 1kHz(CW) or 5kHz(SSB)
increments very quickly:
Quick split by 1kHz or 5kHz increment
TXW/XFC/TFS function
The XFC (TXW TF-SET) button (Monitoring) makes it possible to quickly set the TX
frequency with the tuning dial of the transceiver or the mouse:
1.
select SPLIT mode,
2.
equalize the two VFOs (A=B),
3.
click XFC and hold the left button,
4.
set the TX frequency by rotating the tuning dial of the transceiver (see below how to tune
VFO B from TRX-Manager using your mouse)
5.
release the left button.
SUB/VFOB Frequency tuning
With some rigs, it is possible to read/tune the VFO B in real-time while you are listening to
VFO A : by clicking the SUB Icon ( Monitoring) the SUB Frequency becomes visible and is
"clickable" (digit by digit tuning).
SUB icon, Tuning the SUB VFO
The XFC (TXW TF-SET) function and SUB/VFOB frequency tuning can be used together. First
and if necessary, press F6 to give the focus to the Monitoring. Press and hold ESC (Escape)
on your keyboard to listen to the VFOB frequency. While you hold ESC you can adjust the
digits of the VFO B display using the mouse buttons or the mouse wheel.
Notes
Page 102