User manual

21
Set Time:
• Press ‘Menu’ on the remote control to go to the Main Menu
• Navigate to ‘Set Time’ and press Enter on the remote control.
• Navigate to ‘Up’ ‘Down’ buttons on the remote control to set the day
• Navigate to ‘Right’ on the remote control to select ‘day’
• Select ‘Up’ ‘Down’ buttons on the remote control to set the date
• Select ‘Right’ on the remote control to select ‘year’
• Select ‘Up’ ‘Down’ buttons on the remote control to set the year
• Press ‘Right’ on the remote control to select ‘hour’
• Select ‘Up’ ‘Down’ buttons on the remote control to set the hour
• Press ‘Right’ on the remote control to select ‘minutes’
• Select ‘Up’ ‘Down’ buttons on the remote control to set the minutes
• Press ‘Right’ on the remote control to select ‘AM/PM’
• Select ‘Up’ ‘Down’ buttons on the remote control to set the AM/PM
• Press ‘Enter’ on the remote control to set the time.
Set Time Zone:
• Press ‘Menu’ on the remote control to go to the Main Menu
• Select ‘Settings’ and press ‘Enter’
• Navigate to ‘Set time zone’ and press ‘Enter’
• Select your time zone and press ‘Enter’
To Set Language:
• Press ‘Menu’ on the remote control to go to the Main Menu
• Navigate to ‘Settings’ and press ‘Enter’
• Navigate to ‘Language’ and press ‘Enter’
• Navigate to language of your choice and press ‘Enter’
To view Network Info:
• Press ‘Menu’ on the remote control to go to the Main Menu
• Navigate to ‘Settings’ and press ‘Enter’ on the remote control
• Navigate to ‘Network info’ and press ‘Enter’ on the remote control
• The Digital Picture Frame network info (IP address, DHCP, etc) will be displayed
• Press ‘Enter’ to go to the Main Menu
• (Optional) Press ‘Play’ to play the previous slideshow
To Check Updates:
Frequently, we post updates that add features/enhancements to your Digital Picture Frame. To retrieve the updates:
• Press ‘Menu’ on the remote control to go to the Main Menu
• Navigate to ‘Settings’ and press ‘Enter’ on the remote control
• Navigate to ‘Check updates’ and press ‘Enter’ on the remote control
• If your Digital Picture Frame is already connected to the internet, it will check for any update
• If the update is available. navigate to ‘OK’ and press ‘Enter’ will download the updates
• Depending on the network speed, traffic, and the size of the updates, it might take a few minutes to download the updates
• If the update is available and you do not want to update at this time, navigate to ‘Not at this time’ and press ‘Enter’
• Once the download is complete, the frame will upgrade the software and reboot upon completion.
To enable Auto Check Update:
• Press ‘Menu’ on the remote control to go to the Main Menu
• Navigate to ‘Settings’ and press ‘Enter’ on the remote control
• Navigate to ‘Auto Check Update – yes/no’ and toggle ‘Auto Check Update – yes/no’ by pressing ‘Enter’ on the remote control
When Auto Check Update is enabled, frame will check for latest update when switched on.
To Set Standby Time:
• Press ‘Menu’ on the remote control to go to the Main Menu
• Navigate to ‘Settings’ and press ‘Enter’
• Navigate to ‘Set standby time’ and press ‘Enter’
• Use ‘Up’ ‘Down’ buttons on the remote control to set the ‘hours’ when the Digital Picture Frame will turn off
• Press ‘Right’ on the remote control to select ‘Off mins’
• Use ‘Up’ ‘Down’ buttons on the remote control to set the ‘minutes’ when the Digital Picture Frame will turn off
• Press ‘Right’ on the remote control to select ‘Off AM/PM’
• Use ‘Up’ ‘Down’ buttons on the remote control to set the AM or PM
• Press ‘Right’ on the remote control to select ‘On hours’
• Use ‘Up’ ‘Down’ buttons on the remote control to set the ‘hours’ when the Digital Picture Frame will turn on
• Press ‘Right’ on the remote control to select ‘On mins’
• Use ‘Up’ ‘Down’ buttons on the remote control to set the ‘minutes’ when the Digital Picture Frame will turn on
• Press ‘Right’ on the remote control to select ‘On AM/PM’
• Use ‘Up’ ‘Down’ buttons on the remote control to set the AM or PM
• Press ‘Enter’ on the remote control to set the standby time.
To Enable Standby (Yes or No):
• Press ‘Menu’ on the remote control to go to the Main Menu
• Navigate to ‘Settings’ and press ‘Enter’ on the remote control