Owner`s manual

20
Fault: The Recorder in an edit system or a Preview Machine in a studio gallery is not heard in the
monitoring.
1. Check that the expected audio is appearing on the meters of the audio channels to which the
input ports for that source are routed. If there is no movement on these meters:
a. Check the source is outputting audio.
b. Check the external cables/connections to the mixer inputs.
c. Check the input routing of the Input Matrix is connecting the input ports to the
correct input channels.
2. Check the configuration of the last 2, 4 or 8 channels of the mixer is as described in the Mixer
Configuration section of this manual.
3. Check in the input routing matrix that the input ports are connected to the correct input
channels. The BVE02 monitors which input ports are connected to which input channels.
Misrouting input ports will result in the wrong channels being routed to the inputs of the last
2, 4 or 8 channels and so fed to the monitors.